Jason-1 is carrying a payload of five instruments: the Poseidon-2 altimeter, the mission's main instrument, which measures range; the JMR radiometer, which measures perturbations due to atmospheric water vapour; and three location systems: DORIS, LRA and TRSR.
Poseidon-2 is the mission's main instrument, derived from the experimental Poseidon-1 altimeter on Topex/Poseidon. It is a compact, low-power, low-mass instrument offering a high degree of reliability. Poseidon-2 is a radar altimeter that emits pulses at two frequencies (13.6 and 5.3 GHz, the second frequency is used to determine the electron content in the atmosphere) and analyses the return signal reflected by the surface. The signal's round-trip time is estimated very precisely in order to calculate the range, after applying the necessary corrections (Instrument supplied by CNES).
JMR (Jason-1 Microwave Radiometer)
This instrument measures radiation from the Earth's surface at three frequencies (18.7, 23.8 and 34.0GHz). Measurements acquired at each frequency are combined to determine atmospheric water vapour and liquid water content. Once the water content is known, we can determine the correction to be applied for radar signal path delays (Instrument supplied by NASA).
The location systems onboard Jason-1 complement each other to measure the satellite's position on orbit to within two centimetres on the radial component.
The is highly accurate but it requires ground stations that are complex to operate, and its use can be restricted by adverse weather conditions. It is used to calibrate the other two location systems so that the satellite orbit can be determined as accurately as possible. The TRSR (a GPS receiver) acquires data that complement DORIS measurements in order to determine the orbit in real time and to support precise orbit determination.
DORIS (Doppler location)
The DORIS system uses a ground network of orbitography beacons spread around the globe, which send signals at two frequencies to a receiver on the satellite. The relative motion of the satellite generates a shift in the signal's frequency (called the Doppler shift) that is measured to derive the satellite's velocity. These data are then assimilated in orbit determination models to keep permanent track of the satellite's precise position (to within three centimetres) on its orbit (Instrument supplied by CNES).
TRSR (GPS location)
The TRSR uses the Global Positioning System (GPS) to determine the satellite's position by triangulation, in the same way that GPS fixes are obtained on Earth. At least three GPS satellites determine a mobile object's (in this case, the satellite's) exact position at a given instant. Positional data are then integrated into an orbit determination model to track the satellite's trajectory continuously (Instrument supplied by NASA).
LRA (laser tracking)
The LRA (Laser Retroreflector Array) is an array of mirrors that provide a target for laser tracking measurements from the ground. By analysing the round-trip time of the laser beam, we can locate where the satellite is on its orbit (Instrument supplied by NASA).
Further information on Jason-1 (Aviso website)
All rights reserved, copyright © 2006-2011
Tutorial produced by CLS under contract to ESA and CNES